The VORTEX Crossfire 4-12x40 AO Rifle Scope, Dead-Hold BDC Reticle, MOA (CF2-31019) is ideal for rimfire, long range, predator/varmint, and target applications. Built to exceed the performance standards of similarly priced riflescopes, the Crossfire is standing by, ready and more than willing to assist you with filling that tag.
With its fully multi-coated optics for optimum light transmission and a fast-focus eyepiece for quick target acquisition - the Crossfire makes quick work of dialing in for the shot that counts.
The Crossfire 4-12x40 AO riflescope has tall capped turrets, which maximize ease of windage and elevation adjustments in the field. Adjustable objective (AO) uses an adjustment mechanism on the objective lens to fine-tune focus for the purpose of reducing parallax shooting error.
The Dead-Hold BDC reticle helps eliminate guesswork on hold-over and windage corrections. It is good for hunting / shooting at varying ranges where estimating hold-over is a concern.
The solid one-piece aircraft-grade aluminum alloy construction of the Crossfire riflescope is outstanding in strength, rugged and shockproof. Neutral pressure nitrogen purging guarantees waterproofing and fog proofing that withstands the elements at any elevation.
Objective Lens Diameter, mm
Field of View (FOV) @ 100yds, ft
Eye Relief, in
Exit Pupil, mm
Tube Diameter, in
Max Elevation / Windage Adjustment
85 MOA / 85 MOA
Parallax Setting, yds
10 yards to Infinity
Sunshade is included in the package
Fully multi-coated lenses increase light transmission with multiple anti-reflective coatings on all air-to-glass surfaces
One-inch tube - standard tube diameter for most American riflescopes
One-piece tube maximizes strength and waterproofness
Aircraft-grade aluminum - premium grade of aluminum, valued for fatigue resistance
Fast focus eyepiece allows quick and easy reticle focusing
Tall capped turrets maximize ease of windage and elevation adjustments in the field
Adjustable objective (AO) allows maximum precision on small targets
Reset turrets allow re-indexing of the turret housing to zero after sighting in the riflescope - generally requires use of a coin or wrench
Waterproof optics are sealed with O-rings to prevent moisture, dust, and debris from getting inside the riflescope
Fogproof barrels are filled with nitrogen gas to inhibit internal fogging
Due to the nature of this item, it may be restricted from shipment to the territories listed under Shipping Restrictions. It may require a permit or may be prohibited from ownership in these areas. Contact your local law enforcement/government officials to find out more. If you add it to the shopping cart and check out with it, it may be removed from your order by our customer service team (your credit card will not be charged for the item).